PETG
-
How to Dry Filament Without a Dryer: Oven, Bed, Dehydrator
Dry PLA, PETG and TPU with a food dehydrator, kitchen oven or heated bed under a box: exact temps, times, and how to confirm the spool is dry.
-
Best Nozzle Temperature for PETG by Brand and Hotend
Start PETG at 240C, then run a 230-250C tower in 5C steps. Datasheet ranges, PTFE hotend limits and strength data tell you where to land.
-
FDM Print Stringing: How to Stop It in Four Steps
Stop FDM print stringing in four steps: dry the spool, drop nozzle temp 5-10 °C, tune retraction with a tower, then fix travel and wipe settings.
-
FDM Filament Types Compared: PLA, PETG, ABS, ASA, and TPU
A practical comparison of the five filaments most FDM printers run, PLA, PETG, ABS, ASA and TPU, covering temperatures, strength, and best use cases.
-
PLA vs PETG vs ASA: Which Filament Should You Actually Use?
PLA, PETG, and ASA each have different strengths, weaknesses, and ideal use cases. Here's how to pick the right material for your print.