Troubleshooting
-
FDM Print Stringing: How to Stop It in Four Steps
Stop FDM print stringing in four steps: dry the spool, drop nozzle temp 5-10 °C, tune retraction with a tower, then fix travel and wipe settings.
-
PLA Warping on Bed: How to Fix Lifted Corners
Fix PLA warping on the bed by matching plate type and temperature, cleaning the surface, tuning the first layer, controlling cooling, and adding a brim.
-
Why Are My First Layers Not Sticking? Six Causes and Fixes
First layer adhesion fails for six diagnosable reasons: Z-offset, bed contamination, temperature, slicer settings, moisture, and the wrong surface.
-
Oozing vs Stringing: Telling the Two Apart
Tell nozzle oozing from travel stringing on FDM prints, distinguish residue from a hotend leak, and choose the right next diagnostic check.
-
FDM Printer Maintenance: Daily to Yearly Routine
Plan routine FDM printer maintenance around plate cleaning, nozzle checks, motion components and wear, using the model manual for service intervals.